CCNP TSHOOT

CCNP TSHOOT

Home-Course
Batch Duration Hours Training Type Fees
CCNP-TSHOOT 300-135 4 Weeks 40 Hours Classroom / Online 10000
  • Overview
  • Syllabus
  • Lab Topics
  • Practice Question
  • FAQs
  • Videos

CCNP is the next Professional level Certification for most of the aspiring people after having achieved their Associate & Specialization level Cisco Certifications.

The course validates participants the following skills at the end of the training:

  • Ability to  plan, implement, verify and troubleshoot local and wide-area enterprise networks
  • Coordinate collaboratively with specialists on advanced security, voice, wireless and video solutions.


The CCNP Routing and Switching certification is right for you if you have at least one year of networking experience and you are ready to advance your skills and work independently on complex network solutions. Achieving CCNP Routing and Switching demonstrates the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician.

The routing and switching protocol knowledge and skills you'll gain while pursuing this certification provide a lasting foundation. They are equally relevant for both - the physical networks of today and the virtualized network functions of tomorrow.

Prerequisites:

Valid Cisco CCNA Routing and Switching certification or any Cisco CCIE certification

To get Certification in CCNP Routing and Switching, candidates need to complete three different modules that are Route, Switch & Tshoot.

Troubleshooting and Maintaining Cisco IP Networks v2 (TSHOOT 300-135) is a qualifying exam for the Cisco CCNP Routing & Switching certification.

The course will help candidates with knowledge and skills necessary to plan and perform maintenance on enterprise routed and switched networks through extensive Hands-On Lab exercises. The course explores the use of various technology-based Troubleshooting practices, tools and a systematic ITIL-compliant approach to perform network troubleshooting.

1. Network Principles

  • Use Cisco IOS troubleshooting tools

Debug, conditional debug
Ping and trace route with extended options

  • Apply troubleshooting methodologies

Diagnose the root cause of networking issues
Design and implement valid solutions
Verify and monitor resolution

2. Layer 2 Technologies

  • Troubleshoot switch administration

SDM templates
Managing MAC address table
Troubleshoot Err-disable recovery

  • Troubleshoot Layer 2 protocols

CDP, LLDP
UDLD

  • Troubleshoot VLANs

Access ports
VLAN database
Normal, extended VLAN, voice VLAN

  • Troubleshoot trunking

VTPv1, VTPv2, VTPv3, VTP pruning
dot1Q
Native VLAN
Manual pruning

  • Troubleshoot EtherChannels

LACP, PAgP, manual
Layer 2, Layer 3
Load balancing
EtherChannel misconfiguration guard

  • Troubleshoot spanning tree

PVST+, RPVST +, MST
Switch priority, port priority, path cost, STP timers
Port Fast, BPDU guard, BPDU filter
Loop guard, Root guard

  • Troubleshoot other LAN switching technologies

SPAN, RSPAN

  • Troubleshoot chassis virtualization and aggregation technologies

Stack wise

3. Layer 3 Technologies

  • Troubleshoot IPv4 addressing and subnetting

Address types (Unicast, broadcast, multicast, and VLSM)
ARP
DHCP relay and server
DHCP protocol operations

  • Troubleshoot IPv6 addressing and subnetting

Unicast
EUI-64
ND, RS/RA
Auto config (SLAAC)
DHCP relay and server
DHCP protocol operations

  • Troubleshoot static routing
  • Troubleshoot default routing
  • Troubleshoot administrative distance
  • Troubleshoot passive interfaces
  • Troubleshoot VRF lite
  • Troubleshoot filtering with any protocol
  • Troubleshoot between any routing protocols or routing sources
  • Troubleshoot manual and auto-summarization with any routing protocol
  • Troubleshoot policy-based routing
  • Troubleshoot suboptimal routing
  • Troubleshoot loop prevention mechanisms

Route tagging, filtering
Split-horizon
Route poisoning

  • Troubleshoot RIPv2
  • Troubleshoot EIGRP neighbor relationship and authentication
  • Troubleshoot loop free path selection

RD, FD, FC, successor, feasible successor

  • Troubleshoot EIGPR operations

Stuck in active

  • Troubleshoot EIGRP stubs
  • Troubleshoot EIGRP load balancing

Equal cost
Unequal cost

  • Troubleshoot EIGRP metrics
  • Troubleshoot EIGRP for IPv6
  • Troubleshoot OSPF neighbor relationship and authentication
  • Troubleshoot network types, area types, and router types

Point-to-Point, Multipoint, Broadcast, Non-broadcast
LSA types, Area type: Backbone, Normal, Transit, Stub, NSSA, Totally-Stub
Internal Router, Backbone Router, ABR, ASBR
Virtual link

  • Troubleshoot OSPF path preference
  • Troubleshoot OSPF operations
  • Troubleshoot OSPF for IPv6
  • Troubleshoot BGP peer relationships and authentication

Peer group
Active, passive
States and timers

  • Troubleshoot eBGP

eBGP
4-byte AS number
Private AS

4. VPN Technologies

  • Troubleshoot GRE

5. Infrastructure Security

  • Troubleshoot IOS AAA using local database
  • Troubleshoot device access control

Lines (VTY, AUX, console)
Management plane protection
Password encryption

  • Troubleshoot router security features

IPv4 access control lists (standard, extended, time-based)
IPv6 traffic filter
Unicast reverse path forwarding

6. Infrastructure Services

  • Troubleshoot device management

Console and VTY
Telnet, HTTP, HTTPS, SSH, SCP
TFTP

  • Troubleshoot SNMP

v2
v3

  • Troubleshoot logging

Local logging, syslog, debugs, conditional debugs
Timestamps

  • Troubleshoot Network Time Protocol(NTP)

NTP master, client, version 3, version 4
NTP authentication

  • Troubleshoot IPv4 and IPv6 DHCP

DHCP client, IOS DHCP server, DHCP relay
DHCP options (describe)

  • Troubleshoot IPv4 Network Address Translation (NAT)

Static NAT, Dynamic NAT, PAT

  • Troubleshoot SLA architecture
  • Troubleshoot tracking objects

Tracking objects
Tracking different entities

Who should go for this certification course ?

CCNP certification validates a network professional's ability to install, configure and troubleshoot converged local and wide area networks with 100 to 500 or more nodes. Network Professionals who achieve the CCNP have demonstrated the knowledge and skills required to manage the routers and switches that form the network core, as well as edge applications that integrate voice, wireless, and security into the network.This Cisco certification training course is ideal for IT workers aiming to become network engineers with the responsibility for medium to large scale networks.

How do you ensure 100% certification guarantee ?

Great trainers make a huge difference. We, at SOFTECH SYSTEMS, are dedicated to providing High Quality Training, that guarantees certification and technical know-how.  Our highly qualified and certified trainers, having extensive industry experience, will bring the real world experience to the classroom. They know exactly what you need to know, to pass the Cisco Certification Exams. We are so confident of our teaching methodology that if you follow our advice & guidance and take your study seriously, you will become certified - Guaranteed.

I'm interested in a particular course but I don't meet the pre-requisites. Can I still take the course ?

Softech Systems can tailor the courses to suit your training requirements, so even if you don't meet the pre-requisites, you may still be eligible for the course.

What do my fees cover ?

Your fees include Classroom training, Courseware, Hands-on lab exercises using real Routers / Switches, Preparation for real On-Line exam, 24x7 mentoring, and technical and learning support.

How long is each course ?

Our certification training courses are all self-paced so you have the flexibility of when and where you wish to complete your course. For example, our Route course can be completed in 30 days, but you can complete it even earlier by increasing the time you dedicate to your studies.

Will I get certified immediately after my course ?

Softech Systems provides certification training to prepare you for the actual certification exam(s). We are not involved in the actual examination process, nor do we provide the certification itself. However, we are so confident in the quality of training that we guarantee you will get certified.

Will the score be displayed on CCNP certificate ?

No. it will just say  "you have successfully passed". Score is displayed on the SCORE Report which you get immediately once your exam is over.

How many attempts can I make to complete the Exam ?

As many as you want, there is no limitation on the number of tests. But you should take some time before attending it again.

What exams do I have to take to get my CCNP ?

Implementing Cisco IP Routing (ROUTE 300-101)Implementing Cisco IP Switched Networks (SWITCH 300-115) Troubleshooting and Maintaining Cisco IP Networks v2 (TSHOOT 300-135)

How do I recertify my CCNP ?

Cisco professional level certifications are valid for three years. To recertify, pass ONE of the following before the certification expiration date:Pass any current 642-XXX Professional-level or any 300-XXX Professional-level exam, orPass any current CCIE Written Exam, orPass the current CCDE Written Exam OR current CCDE Practical Exam, orPass the Cisco Certified Architect (CCAr) interview AND the CCAr board review to extend lower certificationsAchieving or recertifying any of the certifications above automatically extends your active Associate and Professional level certification(s) up to the point of expiration of the last certification achieved.

How do I register for the CCNP exam ?

You can take the CCNP exam at any VUE testing center.

Should I take the CCNP courses in a specific order?

While there is no mandatory track, there is a suggested one. First complete ROUTE and SWITCH (they may be taken in any order), then complete TSHOOT.

Do I have to pass CCNA before starting CCNP Training course?

No, the CCNA certification is not a requirement in order to take any of the CCNP courses, but you will need to understand the principals that are covered in CCNA. In addition, you will need to successfully pass the CCNA certification exam(s) as well as all of the CCNP exams, before you can obtain a CCNP certification.

How do I know that I have successfully completed a simulation?

Each simulation has text that explains what task(s) need to be completed and how you will know that the task(s) have been successfully completed. The "success" statement will be something like: "You will have successfully completed the tasks when the following routes are seen in the routing table."Or"You will have successfully completed the tasks when you can ping from Router-A to Router-B."

If I don't know the answer to a question, can I leave it and come back later to answer it?

No. When you move to the next question, the item is submitted to the test engine for grading. You cannot come back and change the answer.

How do I know that I have answered all the questions in a simlet?

Since a simlet is made up of a series of multi-choice questions, the test engine will check each question when you attempt to leave the simlet. If you have not answered all of the questions, you will be warned and will be allowed to return to the simlet.

What is the difference between a simlet and simulation?

Both simlets and a simulations require you to use a simulated IOS interface to complete a series of tasks. With a simlet, you use show commands to obtain information that is used to answer a series of multi-choice questions. With a simulation you use configuration and show commands to perform a series configuration and troubleshooting tasks. Keep in mind that with a simlet or a simulation, the full IOS is not available. Thus if you type a command that is not needed to successfully answer a simlet question or to complete the simulation, you will get a response similar to "That command is not supported". If you receive this statement, this command is not needed to successfully compete the simulation or answer the simlet questions.

Do I have to know the exact IOS command syntax to complete either a simlet or simulation?

Both a simlet and a simulation provide the same level of context help ( ? TAB and command shorthand) that is available in an IOS device.

Do I have to pass the CCNA exam before I can obtain a CCNP certification?

Yes, you will need to successfully pass the CCNA and all of the CCNP exams to obtain a CCNP certification

What if I don't recertify within the three-year period?

You must then meet whatever CCNP requirements there are at that time, from the beginning. It's easier to make sure you recertify. Becoming CCNP certified is a great boost to your career and your confidence, and as with any Cisco certification, it's up to you to stay current with the CCNA and CCNP requirements.

Why is CCNA a pre-requisite for Cisco Certified Network Professional (CCNP) certification?

CCNA ensures that CCNP candidates possess a solid foundation of networking knowledge, which lays the foundation for the professional curriculum. Without that prerequisite foundation, the student may not be able to keep up with others in class and learn the advanced knowledge and skills presented in the CCNP courses.

What are the job skills I will acquire with the revised Cisco Certified Network Professional (CCNP) certification?

The new CCNP program maintains its focus on the advanced skills required to manage the routers and switches that form the network core, and expands to include techniques to deploy and support the wireless, voice and security applications on the network edge. Network professionals who achieve the new CCNP will demonstrate the skills and knowledge required to fully utilize the Cisco ISR router’s ability to provide wire-speed delivery of concurrent data, voice, video and wireless services applications.

Does the Cisco Certified Network Professional (CCNP) recertify my CCNA certification?

Yes, the higher level certification holds the greater value. Therefore achieving and maintaining a Professional level certification renews the lower level general certification.All recertification requirements must be completed before the certification expires. It is not possible to recertify a certification that has already expired

What will I receive when I complete my certification exam?

At the completion of computer-based proctored exams, all candidates will receive an exam score report. The score report includes a score breakdown by exam section to help candidates determine their areas of strength and weakness. In addition, your score and the passing score for the particular exam taken will be listed on the report. Please do not discard or misplace your score report. Keep it in a safe place for future reference and proof of exam completion. Also, information on your score report such as your Cisco ID number and/or Test ID number will be used to identify you in the Certification program.

How do you score your Cisco certification exams?

Cisco Career Certification exams scores are based on a point scaling system that is widely used in the industry. Your score can fall within a point scale of 300 to 1000 points. You are automatically awarded 300 points for beginning the test and can score up to 1000 points if you answer every question correctly on the exam. Please note that the specific number of points awarded to a given question varies on each of our different exams. This does not change the content or format of the exam or the way in which the exam is graded.

Can I achieve a Professional Level certification with an expired CCNA certification?

No, a valid CCNA certification is a prerequisite for Professional Level certifications. Candidates are allowed to complete the Professional Level exams without having a valid CCNA Certification. However, the Professional Level certification will not be awarded until the CCNA prerequisite has been met.

Why do the CISCO exams have expiration dates?

Placing expiration dates on exams ensures that candidates starting a multi exam certification such as CCNP, CCDP, CCVP, CCSP and CCIP, complete the program within a specified time-frame.  By passing all of the required exams within a specified time period, candidates demonstrate that they are tested on current content. In situations where the period exceeds three years, candidates will need to re-take those exams that expire.

Why are simulations added to the Cisco Exams?

With the adoption of simulations on certification exams, Cisco complements a growing trend among information technology (IT) companies to increasingly focus on knowledge and skills in certifications. Simulation-oriented questions model real-life networking scenarios for test takers by requiring them to apply troubleshooting and problem-solving skills to address realistic networking problems. Using simulations in exams will provide a more comprehensive measurement of the skill and knowledge level of certified individuals. The simulations are designed to measure a candidate's ability to execute tasks appropriate to the level of certification. Scenarios used in simulations provide a mor

Videos are not available.

Enquiry


Sagarika Chandrakant Wagh

CISCO CERTIFIED NETWORK ASSOCIATE

Mukesh sir delivered the technical information needed to pass the Exam in a manner that I could retain and understand easily. I never had a better experience of Classroom Training Environment where the very core complex technical issues were being delivered in a very simplistic and comprehensive way. I will definitely refer any of my peers to Softech Systems.

Ashutosh Anna Jagtap

CISCO CERTIFIED NETWORK ASSOCIATE

The Class was Very good and to the point.Thanks for your efforts. I enjoyed the instructor's humor. If other technical classes were this fun I would probably have a whole list of certifications.

Deepali Suresh Nehere

CISCO CERTIFIED NETWORK ASSOCIATE

Thanks for everything. I have undergone lots of accelerated courses in my student life and you are "The Best" instructor I ever had. When I came in to this class, I was bit worried about the amount of knowledge that I had to learn in a very short time. Thanks to Excellent Training efforts. I am feeling VERY comfortable with all the information and teachings you provided.

Akshay Sarjerao Kadam

CISCO CERTIFIED NETWORK ASSOCIATE

This class was one of the best instructed classes I've had. You managed to takedrycontent and keep all your students engaged and interested throughout the course.There were numerous opportunities to practice what we learned and directly apply the knowledge.

Dadhale Sambhaji Kishan

CISCO CERTIFIED NETWORK ASSOCIATE

You did your usual excellent job with the training, and you are one of the very few Technical institute that live up to their name. You are indeed Excellent Training! I m brimming with confidence that I will pass the CCNP Support test easily

Vaibhav Tamhankar

Cisco - Multi-Protocol Label Switching

Really enjoyed the class. I have already recommended it to a coworker. I generally never attend training because it is not worth my time. Your class is different, very good participation from the students, the instruction pace is good, the instructor had a good sense of humor, and your teaching skills are very good. If I can, I will certainly try to take other classes that you teach.

Quick Enquiry